PV Panel Testing

Special offers for PV panel testing

SUN ENERGY SOLUTION offers you a UNIQUE OPPORTUNITY: a complete test of your photovoltaic panels at exceptionally low prices.

Residential PV up to 10 kW

50 €

PV parks up to 100 kW

150 €

PV parks up to 150 kW

200 €

PV parks up to 500 kW

400 €

PV parks up to 1,000 kW

600 €

The above prices do NOT include VAT (24% or 17%) or travel expenses outside the Attica basin, which are charged at €0.25 per kilometre. Travel costs can be reduced when scheduled work is combined with the inspection of other installations.

The test includes

  • Thermal imaging of all photovoltaic panels of the installation.
  • Sample testing of the electrical values of the panels that show NO problems in thermography. In detail we carry out:
    1. Insulation resistance measurement, open-circuit voltage & short-circuit current measurement (Voc/Isc), measurement & plotting of the current/voltage (I/V) & power/voltage (P/V) curves.
    2. Determination of the actual efficiency of the PV modules.
  • FULL testing of the electrical values of the panels that DO SHOW problems in thermography.
  • Thermal imaging of the whole installation and a Thermographic Data Report.
  • Testing and maintenance of the PV modules, including insulation resistance, Voc/Isc, I/V curve and module efficiency.
Θερμογραφικός έλεγχος φωτοβολταϊκών

Typical PV panel problems

  • Visible corrosion on the ribbons and insulation of the cell contacts due to overheating of the PV modules.
  • Visible damage to the EVA encapsulation with a simultaneous drop in module efficiency.
  • Bypass diode failure. Change of the I/V curve.
  • Hot Spot phenomenon on a PV module. Change of the I/V curve.

When the test is complete you receive

  • A digital file with all thermographic results of the panels, together with photographs.
  • Digital and printed copies of the measured electrical characteristics of your panels, showing their performance at the time of measurement and the DEVIATION from the manufacturer's rated performance.
  • Digital and printed copies of all thermal images, photographs and electrical measurements of the panels that showed problems.
  • A REPORT of the thermographic data and conclusions on the actual operating condition of your panels.

Detection of PID (Potential Induced Degradation)

Early preventive testing of PV panels for Potential Induced Degradation (PID) is extremely important, so that the necessary actions can be taken to restore the panels to their original performance. If the loss of performance due to PID exceeds 30%, restoring the panels becomes IMPOSSIBLE.

Testing and maintenance work is carried out by our experienced, highly trained engineers and technicians, using all the necessary instruments, the most important of which are:

  1. PV installation multi-tester METREL MI3108 EurotestPV
  2. Thermal camera FLIR i7
  3. Overcurrent, short-circuit and leakage protection tester METREL MI3122 Zline-Loop/RCD
  4. Insulation Tester DI-6200
  5. Earth Resistance Tester MS 5209
  6. 3 Phase Digital Power Clamp Meter MASTECH MS2205
  7. Digital Multimeter MASTECH MY-67
  8. Clamp Tester LUTRON DM-6046
  9. Thermal Leak Detector TLD100-XJ
Έλεγχος PID φωτοβολταϊκών

For more information, do not hesitate to contact us.

Tel: +30 210 4960248, +30 210 9425120 · [email protected] · Mon - Fri 09:00 - 17:00